Outils pour utilisateurs
No renderer 'odt' found for mode 'odt'
projets:esp32-cam_timelaps_code
/*
ESP32-CAM l'oeil clignotemps
TimeLapseAvi
ESP32-CAM enregistreur Video pour CAMERA_MODEL_AI_THINKER
by James Zahary July 20, 2019 TimeLapseAvi23x.ino
jamzah.plc@gmail.com https://github.com/jameszah/ESP32-CAM-Video-Recorder
This program records an AVI video on the SD Card of an ESP32-CAM.
jameszah/ESP32-CAM-Video-Recorder is licensed under the
GNU General Public License v3.0
modif gepeto@du-libre.org https://snhack.org/doku.php?id=projets:esp32-cam_ftp_avi_timelaps
The is Arduino code, with standard setup for ESP32-CAM
- Board ESP32 Wrover Module
- Partition Scheme Huge APP (3MB No OTA)
//server.on("/", index_handler);
server.on("/capture", capture_handler);
server.on("/start", start_handler);
server.on("/stop", stop_handler);
server.on("/saveconfig", saveSPIFFSConfigFile);
server.on("/list", listDir_handler);
server.on("/reset", reset_handler);
Accet http://esp32-cam.local (devname dans le fichier config.jsn)
/sdcard/config.jsn:
{"devname":"esp32-cam",
"framesize":10,
"repeat":0,
"xspeed":1,
"gray":0,
"quality":10,
"capture_interval":10000,
"length":1800,
"ssid":"wifissid",
"pass":"trucpass",
"horaire":"6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21"
}
*/
//
// WARNING!!! Make sure that you have either selected ESP32 Wrover Module,
// or another board which has PSRAM enabled
//
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// edit these parameters for your needs
static const char vernum[] = "v10Gepeto"; // modif AccesPoint and http filesystem
// plage horaire
#include <dummy.h>
// 1 for blink red led with every sd card write, at your frame rate
// 0 for blink only for skipping frames and SOS if camera or sd is broken
#define BlinkWithWrite 0
static const char devname_conf[] = "epscam"; // nom de secour
char devname[20] = "espcam";
// EDIT ssid and pass
char ssid[40] = "";
char pass[20] = "";
const char ssid_ap[] = "ESPCAM";
const char pass_ap[] = "1234567890";
int invisible = 0;
int canal_wifi = 6;
int max_connexion = 4;
int numero_fichier = 1; // si pas de serveur ntp retour a un index dans /sdcard/nofile.txt
int connAttempts = 0; // si >10 mode AP
bool bouton_init_ok = false;
bool sleep_mode = false;
long sleep_duree = 10 ;
char horaire[80] = {0};// heures d'enregistrement
char conf_horaire[] = "6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21";// heures d'enregistrement
#define TIMEZONE "CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00" // de https://remotemonitoringsystems.ca/time-zone-abbreviations.php
// startup defaults for first recordin
// here are the recording options from the "retart web page"
// framesize=UXGA&length=1800&interval=10000&quality=10&repeat=100&speed=1&gray=0
// VGA 10 fps for 30 min, repeat, realtime http://192.168.0.117/start?framesize=VGA&length=1800&interval=100&quality=10&repeat=100&speed=1&gray=0
// VGA 2 fps, for 30 minutes repeat, 30x playback http://192.168.0.117/start?framesize=VGA&length=1800&interval=500&quality=10&repeat=300&speed=30&gray=0
// UXGA 1 sec per frame, for 30 minutes repeat, 30x playback http://192.168.0.117/start?framesize=UXGA&length=1800&interval=1000&quality=10&repeat=100&speed=30&gray=0
// UXGA 2 fps for 30 minutes repeat, 15x playback http://192.168.0.117/start?framesize=UXGA&length=1800&interval=500&quality=10&repeat=100&speed=30&gray=0
// CIF 20 fps second for 30 minutes repeat http://192.168.0.117/start?framesize=CIF&length=1800&interval=50&quality=10&repeat=100&speed=1&gray=0
// reboot startup parameters here
int record_on_reboot = 1; // set to 1 to record, or 0 to NOT record on reboot
int framesize = 6; // vga (10 UXGA, 7 SVGA, 6 VGA, 5 CIF)
int repeat = 100; // 100 files
int xspeed = 1; // 1x playback speed (realtime is 1)
int gray = 0; // not gray
int quality = 10; // 10 on the 0..64 scale, or 10..50 subscale - 10 is good, 20 is grainy and smaller files
int capture_interval = 100; // 100 ms or 10 frames per second
int total_frames = 18000; // 18000 frames = 10 fps * 60 seconds * 30 minutes = half hour
int PIRpin = 12;
//int ResetPin = 13; // pin pour ouverture de la config
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
int new_config = 5; // this system abandoned !
int xlength = total_frames * capture_interval / 1000;
int recording = 0;
int PIRstatus = 0;
int PIRrecording = 0;
int ready = 0;
#define ESP_getChipId() ((uint32_t)ESP.getEfuseMac())
//#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE
#include "esp_log.h"
#include "esp_camera.h"
#include <ESPmDNS.h>
#include <FS.h>
#include "SPIFFS.h"
// Now support ArduinoJson 6.0.0+ ( tested with v6.14.1 )
#include <ArduinoJson.h> //https://github.com/bblanchon/ArduinoJson
#include <WiFi.h>
#include <WiFiClient.h>
#include <WebServer.h>
//#include <ESP32WebServer.h> // a changer dans src de ESP_WiFiManager
//#include <ESP_WiFiManager.h> //https://github.com/khoih-prog/ESP_WiFiManager
#include <WiFiManager.h> // https://github.com/tzapu/WiFiManager
//default custom static IP
char static_ip[16] = "10.0.1.56";
char static_gw[16] = "10.0.1.1";
char static_sn[16] = "255.255.255.0";
//FtpServer ftpSrv; //set #define FTP_DEBUG in ESP32FtpServer.h to see ftp verbose on serial
//#define FTP_DEBUG in ESP32FtpServer.h to see ftp verbose on serial
File fsUploadFile;
File list_file;
File f_log;
// Time
#include "time.h"
// MicroSD
#include "driver/sdmmc_host.h"
#include "driver/sdmmc_defs.h"
#include "sdmmc_cmd.h"
#include "esp_vfs_fat.h"
#include <SD_MMC.h>
long current_millis;
long last_capture_millis = 0;
static esp_err_t cam_err;
static esp_err_t card_err;
char strftime_buf[64];
int file_number = 0;
int internet_connected = 0; // 0 non connecté , 1 mode sta , 2 freewifi, 3 mode AP
struct tm timeinfo;
time_t now;
char localip[20] = {};
char buf_config[513] = {0};
size_t buftaille = 0;
char *filename ;
char *stream ;
int newfile = 0;
int frames_so_far = 0;
FILE *myfile;
long bp;
long ap;
long bw;
long aw;
long totalp;
long totalw;
float avgp;
float avgw;
int overtime_count = 0;
// CAMERA_MODEL_AI_THINKER
#define PWDN_GPIO_NUM 32
#define RESET_GPIO_NUM -1
#define XCLK_GPIO_NUM 0
#define SIOD_GPIO_NUM 26
#define SIOC_GPIO_NUM 27
#define Y9_GPIO_NUM 35
#define Y8_GPIO_NUM 34
#define Y7_GPIO_NUM 39
#define Y6_GPIO_NUM 36
#define Y5_GPIO_NUM 21
#define Y4_GPIO_NUM 19
#define Y3_GPIO_NUM 18
#define Y2_GPIO_NUM 5
#define VSYNC_GPIO_NUM 25
#define HREF_GPIO_NUM 23
#define PCLK_GPIO_NUM 22
// GLOBALS
#define BUFFSIZE 512
// global variable used by these pieces
char str[20];
uint16_t n;
uint8_t buf[BUFFSIZE];
static int i = 0;
uint8_t temp = 0, temp_last = 0;
unsigned long fileposition = 0;
uint16_t frame_cnt = 0;
uint16_t remnant = 0;
uint32_t length = 0;
uint32_t startms;
uint32_t elapsedms;
uint32_t uVideoLen = 0;
bool is_header = false;
long bigdelta = 0;
int other_cpu_active = 0;
int skipping = 0;
int skipped = 0;
int fb_max = 12;
camera_fb_t * fb_q[30];
int fb_in = 0;
int fb_out = 0;
camera_fb_t * fb = NULL;
FILE *avifile = NULL;
FILE *idxfile = NULL;
FILE *nofile = NULL;
FILE *configSD = NULL;
FILE *ficnofic = NULL;
#define AVIOFFSET 240 // AVI main header length
unsigned long movi_size = 0;
unsigned long jpeg_size = 0;
unsigned long idx_offset = 0;
uint8_t zero_buf[4] = {0x00, 0x00, 0x00, 0x00};
uint8_t dc_buf[4] = {0x30, 0x30, 0x64, 0x63}; // "00dc"
uint8_t avi1_buf[4] = {0x41, 0x56, 0x49, 0x31}; // "AVI1"
uint8_t idx1_buf[4] = {0x69, 0x64, 0x78, 0x31}; // "idx1"
uint8_t vga_w[2] = {0x80, 0x02}; // 640
uint8_t vga_h[2] = {0xE0, 0x01}; // 480
uint8_t cif_w[2] = {0x90, 0x01}; // 400
uint8_t cif_h[2] = {0x28, 0x01}; // 296
uint8_t svga_w[2] = {0x20, 0x03}; // 800
uint8_t svga_h[2] = {0x58, 0x02}; // 600
uint8_t uxga_w[2] = {0x40, 0x06}; // 1600
uint8_t uxga_h[2] = {0xB0, 0x04}; // 1200
const int avi_header[AVIOFFSET] PROGMEM = {
0x52, 0x49, 0x46, 0x46, 0xD8, 0x01, 0x0E, 0x00, 0x41, 0x56, 0x49, 0x20, 0x4C, 0x49, 0x53, 0x54,
0xD0, 0x00, 0x00, 0x00, 0x68, 0x64, 0x72, 0x6C, 0x61, 0x76, 0x69, 0x68, 0x38, 0x00, 0x00, 0x00,
0xA0, 0x86, 0x01, 0x00, 0x80, 0x66, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00,
0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x80, 0x02, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4C, 0x49, 0x53, 0x54, 0x84, 0x00, 0x00, 0x00,
0x73, 0x74, 0x72, 0x6C, 0x73, 0x74, 0x72, 0x68, 0x30, 0x00, 0x00, 0x00, 0x76, 0x69, 0x64, 0x73,
0x4D, 0x4A, 0x50, 0x47, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0A, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x73, 0x74, 0x72, 0x66,
0x28, 0x00, 0x00, 0x00, 0x28, 0x00, 0x00, 0x00, 0x80, 0x02, 0x00, 0x00, 0xe0, 0x01, 0x00, 0x00,
0x01, 0x00, 0x18, 0x00, 0x4D, 0x4A, 0x50, 0x47, 0x00, 0x84, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x4E, 0x46, 0x4F,
0x10, 0x00, 0x00, 0x00, 0x6A, 0x61, 0x6D, 0x65, 0x73, 0x7A, 0x61, 0x68, 0x61, 0x72, 0x79, 0x20,
0x76, 0x36, 0x30, 0x20, 0x4C, 0x49, 0x53, 0x54, 0x00, 0x01, 0x0E, 0x00, 0x6D, 0x6F, 0x76, 0x69,
};
#define LED_BUILTIN 2
#define LED_ON HIGH
#define LED_OFF LOW
// Pin D2 mapped to pin GPIO2/ADC12 of ESP32, or GPIO2/TXD1 of NodeMCU control on-board LED
#define PIN_LED LED_BUILTIN
////////////// test horaire ////////////////////
void Test_horaires() { // cherche si heure maintenant contenue dans horaires
Serial.print ( timeinfo.tm_year) ;
if ( timeinfo.tm_year < 110) { // date year deouis 1900
return;
} else {
Serial.println(F(" test horaire"));
int heure = 0 ;
int taille_plages = strlen(horaire);
if (taille_plages > 3 ) {
char buf[3] = "00";
for (int i = 0; i < taille_plages; i++) {
buf[0] = horaire[i++];
if (horaire[i] != ',' && horaire[i] != ';' && horaire[i] != ' ') buf[1] = horaire[i++];
else buf[1] = '\0';
buf[2] = '\0';
heure = atoi(buf);
time(&now);
localtime_r(&now, &timeinfo);
//Serial.print(F("heures "));
//Serial.println(heure);
if ((int)timeinfo.tm_hour == heure) {
//Serial.print(F(" "));
//Serial.println(strftime_buf);
heure = 99;
break;
}
}
int reste = 58 - (int)timeinfo.tm_min;
if (reste > 3 && heure < 90) {
//end_avi();
Serial.print(F("Sleep "));
Serial.println(reste);
esp_sleep_enable_timer_wakeup(1000000 * 60 * (uint64_t)reste);
esp_deep_sleep_start();
delay(1000);
}
} else Serial.println(F("ok"));
}
}
///
/// SPIFFS/SD config
///
bool readFileconfig() {
Serial.println(F("/sdcard/config.jsn"));
configSD = fopen("/sdcard/config.jsn", "r");
if (configSD == NULL) {
Serial.println(F("pas sur la SD"));
return false;
}
//Serial.write(configSD.read());
fseek(configSD, 0, SEEK_END);
int bufftaille = ftell(configSD);
fseek(configSD, 0, SEEK_SET);
while (!feof(configSD)) {
fread(buf_config, bufftaille + 1, 1, configSD);
}
fclose(configSD);
Serial.println(buf_config);
return true;
}
void saveFileconfigSD() {
configSD = fopen("/sdcard/config.jsn", "w");
if (configSD == NULL) {
Serial.println(F("Failed to open /sdcard/config.jsn for writing"));
}
DynamicJsonDocument json(512);
json["devname"] = devname;
json["quality"] = quality;
json["framesize"] = framesize;
json["capture_interval"] = capture_interval;
json["repeat"] = repeat;
json["xspeed"] = xspeed;
json["length"] = xlength;
json["gray"] = gray;
json["ssid"] = ssid;
json["pass"] = pass;
json["horaire"] = horaire;
serializeJson(json, buf_config);
fwrite(buf_config, sizeof(buf_config), 1, configSD);
fclose(configSD);
}
bool loadSPIFFSConfigFile(void)
{
//clean FS, for testing
//SPIFFS.format();
if (SPIFFS.begin())
{
//read configuration from FS json
Serial.println(F("Mounting FS..."));
if (readFileconfig() == true) {
//Serial.print(F("flash config "));
//Serial.println(buf_config);
File configFile = SPIFFS.open("/config.jsn", "w");
configFile.print(buf_config);
configFile.flush();
configFile.close();
delay(100);
}
if (SPIFFS.exists("/config.jsn"))
{
Serial.println(F("Reading config file"));
File configFile = SPIFFS.open("/config.jsn", "r");
if (configFile)
{
Serial.print(F("Opened config file, size = "));
size_t configFileSize = configFile.size();
Serial.println(configFileSize);
// Allocate a buffer to store contents of the file.
std::unique_ptr<char[]> buf(new char[configFileSize + 1]);
configFile.readBytes(buf.get(), configFileSize);
Serial.print(F("\nJSON parseObject() result : "));
DynamicJsonDocument json(512);
auto deserializeError = deserializeJson(json, buf.get(), configFileSize);
if ( deserializeError )
{
Serial.println(F("failed"));
return false;
}
else
{
if (json["framesize"]) framesize = json["framesize"] | framesize;
if (json["blynk_server"]) repeat = json["repeat"] | repeat;
if (json["xspeed"]) xspeed = json["blynk_port"] | xspeed;
if (json["gray"]) gray = json["gray"] | gray;
if (json["quality"]) quality = json["quality"] | quality ;
if (json["capture_interval"]) capture_interval = json["capture_interval"] | capture_interval;
if (json["length"]) xlength = json["length"] | xlength;
if (json["ssid"]) strlcpy (ssid , json["ssid"], sizeof(ssid));
else strlcpy (ssid , ssid_ap, sizeof(ssid));
if (json["pass"]) strlcpy (pass , json["pass"], sizeof(pass));
else strlcpy (pass , pass_ap, sizeof(pass));
if (json["devname"]) strlcpy (devname , json["devname"], sizeof(devname));
else strlcpy (devname , devname_conf, sizeof(devname));
if (json["horaire"]) strlcpy (horaire , json["horaire"], sizeof(horaire));
else strlcpy (horaire , conf_horaire, sizeof(horaire));
}
//serializeJson(json, Serial);
Serial.println(F("json :"));
serializeJsonPretty(json, Serial);
configFile.close();
Serial.println(F("OK"));
total_frames = xlength * 1000 / capture_interval;
}
}
}
else
{
Serial.println(F("failed to mount FS"));
return false;
}
return true;
}
////
////
////
void heartBeatPrint(void)
{
static int num = 1;
if (WiFi.status() == WL_CONNECTED)
Serial.print(F("H")); // H means connected to WiFi
else
Serial.print(F("F")); // F means not connected to WiFi
if (num == 80)
{
Serial.println();
num = 1;
}
else if (num++ % 10 == 0)
{
Serial.print(F(" "));
}
}
void toggleLED()
{
//toggle state
digitalWrite(PIN_LED, !digitalRead(PIN_LED));
}
void check_status()
{
static ulong checkstatus_timeout = 0;
static ulong LEDstatus_timeout = 0;
static ulong currentMillis;
#define HEARTBEAT_INTERVAL 10000L
#define LED_INTERVAL 2000L
currentMillis = millis();
if ((currentMillis > LEDstatus_timeout) || (LEDstatus_timeout == 0))
{
// Toggle LED at LED_INTERVAL = 2s
toggleLED();
LEDstatus_timeout = currentMillis + LED_INTERVAL;
}
// Print hearbeat every HEARTBEAT_INTERVAL (10) seconds.
if ((currentMillis > checkstatus_timeout) || (checkstatus_timeout == 0))
{
heartBeatPrint();
checkstatus_timeout = currentMillis + HEARTBEAT_INTERVAL;
}
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// AviWriterTask runs on cpu 1 to write the avi file
//
TaskHandle_t CameraTask, AviWriterTask;
SemaphoreHandle_t baton;
int counter = 0;
void codeForAviWriterTask( void * parameter )
{
for (;;) {
if (ready) {
make_avi();
}
delay(1);
}
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// CameraTask runs on cpu 0 to take pictures and drop them in a queue
//
void codeForCameraTask( void * parameter )
{
for (;;) {
if (other_cpu_active == 1 ) {
current_millis = millis();
if (current_millis - last_capture_millis > capture_interval) {
last_capture_millis = millis();
xSemaphoreTake( baton, portMAX_DELAY );
if ( ( (fb_in + fb_max - fb_out) % fb_max) + 1 == fb_max ) {
xSemaphoreGive( baton );
Serial.print(F(" Queue Full, Skipping ..")); // the queue is full
skipped++;
skipping = 1;
}
if (skipping > 0 ) {
if (!BlinkWithWrite) {
digitalWrite(33, LOW);
}
if (skipping % 2 == 0) { // skip every other frame until queue is cleared
frames_so_far = frames_so_far + 1;
frame_cnt++;
fb_in = (fb_in + 1) % fb_max;
bp = millis();
fb_q[fb_in] = esp_camera_fb_get();
totalp = totalp - bp + millis();
} else {
Serial.print(((fb_in + fb_max - fb_out) % fb_max)); // skip an extra frame to empty the queue
skipped++;
}
skipping = skipping + 1;
if (((fb_in + fb_max - fb_out) % fb_max) == 0 ) {
skipping = 0;
Serial.println(" Queue cleared. ");
delay(100);
}
xSemaphoreGive( baton );
} else {
skipping = 0;
frames_so_far = frames_so_far + 1;
frame_cnt++;
fb_in = (fb_in + 1) % fb_max;
bp = millis();
fb_q[fb_in] = esp_camera_fb_get();
totalp = totalp - bp + millis();
xSemaphoreGive( baton );
}
}
}
delay(1);
}
}
//
// Writes an uint32_t in Big Endian at current file position
//
static void inline print_quartet(unsigned long i, FILE * fd)
{
uint8_t x[1];
x[0] = i % 0x100;
size_t i1_err = fwrite(x , 1, 1, fd);
i = i >> 8; x[0] = i % 0x100;
size_t i2_err = fwrite(x , 1, 1, fd);
i = i >> 8; x[0] = i % 0x100;
size_t i3_err = fwrite(x , 1, 1, fd);
i = i >> 8; x[0] = i % 0x100;
size_t i4_err = fwrite(x , 1, 1, fd);
}
WebServer server(80);
void startCameraServer();
//httpd_handle_t camera_httpd = NULL;
char the_page[3000];
WiFiEventId_t eventID;
#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// setup() runs on cpu 1
//
void setup() {
//WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); //disable brownout detector // creates other problems
Serial.begin(115200);
Serial.setDebugOutput(true);
Serial.println(" ");
Serial.printf("ESP-CAM Video Recorder %s\n", vernum);
// SD camera init
card_err = init_sdcard();
if (card_err != true) {
Serial.printf("init sd error 0x%x", card_err);
major_fail();
}
loadSPIFFSConfigFile();
//Serial.printf(" http://%s.local - to access the camera\n", devname);
pinMode(33, OUTPUT); // little red led on back of chip
digitalWrite(33, LOW); // turn on the red LED on the back of chip
if (!psramFound()) {
Serial.println("paraFound wrong - major fail");
//major_fail();
}
init_wifi();
Test_horaires();
startCameraServer();
Serial.printf("Total space: %lluMB\n", SD_MMC.totalBytes() / (1024 * 1024));
Serial.printf("Used space: %lluMB\n", SD_MMC.usedBytes() / (1024 * 1024));
digitalWrite(33, HIGH); // red light turns off when setup is complete
baton = xSemaphoreCreateMutex();
xTaskCreatePinnedToCore(
codeForCameraTask,
"CameraTask",
10000,
NULL,
1,
&CameraTask,
0);
delay(50);
xTaskCreatePinnedToCore(
codeForAviWriterTask,
"AviWriterTask",
10000,
NULL,
2,
&AviWriterTask,
1);
delay(50);
recording = 0; // we are NOT recording
config_camera();
pinMode(4, OUTPUT); // using 1 bit mode, shut off the Blinding Disk-Active Light
digitalWrite(4, LOW);
pinMode(PIRpin, INPUT_PULLDOWN); // or PULLDOWN for active high
newfile = 0; // no file is open // don't fiddle with this!
recording = record_on_reboot;
ready = 1;
Serial.print(F("Camera Ready! Use http://"));
Serial.print(WiFi.localIP());
Serial.print(F(": "));
Serial.print(localip);
Serial.print(F(": "));
Serial.println(WiFi.softAPIP());
Serial.println(F(" to connect"));
}
bool init_wifi()
{
if (internet_connected < 3) { // que si pas deja en AP
WiFi.disconnect(true);
WiFi.mode(WIFI_STA);
WiFi.setHostname(devname);
WiFi.begin(ssid, pass);
delay(1000);
while (WiFi.status() != WL_CONNECTED ) {
delay(1000);
Serial.print(F("."));
if (connAttempts == 10) {
Serial.println(F("tentative FreeWifi ntp")); // juste pour ntp
WiFi.begin("FreeWifi");
delay(2000);
if (WiFi.SSID() == (String)"FreeWifi") {
Serial.println(F("Temps FreeWifi"));
internet_connected = 2;
}
delay(1000);
}
if(connAttempts > 13) { // laisse tomber, passage AP
internet_connected = 3;
break;
}
connAttempts++;
}
}
if (internet_connected == 0) internet_connected = 1;
if (internet_connected < 3) {
Serial.println(WiFi.SSID());
char pool[16] = "";
if ( internet_connected == 2) {
sprintf(pool, "%s", WiFi.gatewayIP().toString().c_str());
} else {
sprintf(pool, "pool.ntp.org");
}
Serial.print(F("Attente ntp de "));
Serial.print(pool);
configTime(0, 0, pool);
setenv("TZ", TIMEZONE, 1); // Paris time zone from #define at top
tzset();
time_t now ;
timeinfo = { 0 };
int retry = 0;
const int retry_count = 10;
delay(2000);
time(&now);
localtime_r(&now, &timeinfo);
Serial.print(F(" : "));
Serial.println(ctime(&now));
Serial.print(F(" - "));
while (!time(nullptr) && ++retry < retry_count) {
Serial.printf("... (%d/%d) -- %d\n", retry, retry_count, timeinfo.tm_year);
delay(1000);
time(&now);
localtime_r(&now, &timeinfo);
Serial.println(ctime(&now));
Serial.print(F(" ok ntp "));
}
sprintf(localip, "%s", WiFi.localIP().toString().c_str());
}
if (internet_connected >= 2) {
Serial.print(F("\nPassage en Point d acces..."));
WiFi.disconnect();
delay(500);
WiFi.mode(WIFI_AP);
delay(1000);
WiFi.softAP(ssid_ap, pass_ap, canal_wifi, invisible, max_connexion);
delay(1000);
Serial.print(F("ouverture paswd de "));
Serial.print(ssid_ap);
Serial.print(F(" "));
Serial.println(pass_ap);
internet_connected = 3;
delay(1000);
sprintf(localip, "%s", WiFi.softAPIP().toString().c_str());
Serial.println(WiFi.softAPIP());
Serial.println(WiFi.localIP());
if (!MDNS.begin(devname)) {
Serial.println(F("Error MDNS !"));
} else {
Serial.printf("mDNS started '%s'\n", devname);
}
}
Serial.println(localip);
return true;
}
bool init_sdcard()
{
esp_err_t ret = ESP_FAIL;
sdmmc_host_t host = SDMMC_HOST_DEFAULT();
host.flags = SDMMC_HOST_FLAG_1BIT; // using 1 bit mode
host.max_freq_khz = SDMMC_FREQ_HIGHSPEED;
sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
slot_config.width = 1; // using 1 bit mode
//Serial.print("Slot config width should be 4 width: "); Serial.println(slot_config.width);
esp_vfs_fat_sdmmc_mount_config_t mount_config = {
.format_if_mount_failed = false,
.max_files = 5,
};
//pinMode(4, OUTPUT); // using 1 bit mode, shut off the Blinding Disk-Active Light
//digitalWrite(4, LOW);
sdmmc_card_t *card;
//Serial.println(F("Mounting SD card..."));
ret = esp_vfs_fat_sdmmc_mount("/sdcard", &host, &slot_config, &mount_config, &card);
if (ret == ESP_OK) {
Serial.println(F("SD mount ok!"));
} else {
Serial.printf("err mount SD card VFAT Error: %s", esp_err_to_name(ret));
major_fail();
return false;
}
sdmmc_card_print_info(stdout, card);
Serial.print("SD_MMC Begin: "); Serial.println(SD_MMC.begin()); // required by ftp system ??
listDirSD(SD_MMC, "/", 0);
return true;
}
void listDirSD(fs::FS & fs, const char * dirname, uint8_t levels) {
Serial.printf("Listing directory: %s\n", dirname);
File root = fs.open(dirname);
if (!root) {
Serial.println(F("err open directory"));
return;
}
if (!root.isDirectory()) {
Serial.println(F("Not a dir"));
return;
}
File file = root.openNextFile();
while (file) {
if (file.isDirectory()) {
Serial.print(F(" DIR : "));
Serial.println(file.name());
if (levels) {
listDirSD(fs, file.name(), levels - 1);
}
} else {
Serial.print(F(" FILE: "));
Serial.print(file.name());
Serial.print(F(" SIZE: "));
Serial.println(file.size());
}
file = root.openNextFile();
}
return;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// Make the avi move in 4 pieces
//
// make_avi() called in every loop, which calls below, depending on conditions
// start_avi() - open the file and write headers
// another_pic_avi() - write one more frame of movie
// end_avi() - write the final parameters and close the file
void make_avi( ) {
PIRstatus = digitalRead(PIRpin);
if (PIRstatus == 1) {
if (PIRrecording == 1) {
// keep recording for 15 more seconds
if ( (millis() - startms) > (total_frames * capture_interval - 5000) ) {
total_frames = total_frames + 10000 / capture_interval ;
Serial.println(F("Add 10 s"));
}
} else {
if ( recording == 0 && newfile == 0) {
//start a pir recording with current parameters, except no repeat and 15 seconds
Serial.println(F("Start a PIR"));
PIRrecording = 1;
repeat = 0;
total_frames = 15000 / capture_interval;
xlength = total_frames * capture_interval / 1000;
recording = 1;
}
}
}
// we are recording, but no file is open
if (newfile == 0 && recording == 1) { // open the file
digitalWrite(33, HIGH);
newfile = 1;
start_avi();
} else {
// we have a file open, but not recording
if (newfile == 1 && recording == 0) { // got command to close file
digitalWrite(33, LOW);
end_avi();
Serial.println(F("ok capture command"));
frames_so_far = total_frames;
newfile = 0; // file is closed
recording = 0; // DO NOT start another recording
PIRrecording = 0;
} else {
if (newfile == 1 && recording == 1) { // regular recording
if (frames_so_far >= total_frames) { // we are done the recording
Serial.println(F("ok capture for total frames!"));
digitalWrite(33, LOW); // close the file
end_avi();
frames_so_far = 0;
newfile = 0; // file is closed
if (repeat > 0) {
recording = 1; // start another recording
repeat = repeat - 1;
} else {
recording = 0;
PIRrecording = 0;
}
} else if ((millis() - startms) > (total_frames * capture_interval)) { // time is up, even though we have not done all the frames
Serial.println (F(" ")); Serial.println(F("Done capture for time"));
Serial.print(F("Time Elapsed: ")); Serial.print(millis() - startms); Serial.print(F(" Frames: ")); Serial.println(frame_cnt);
Serial.print(F("Config: ")); Serial.print(total_frames * capture_interval ) ; Serial.print(F(" ("));
Serial.print(total_frames); Serial.print(F(" x ")); Serial.print(capture_interval); Serial.println(F(")"));
digitalWrite(33, LOW); // close the file
end_avi();
frames_so_far = 0;
newfile = 0; // file is closed
if (repeat > 0) {
recording = 1; // start another recording
repeat = repeat - 1;
} else {
recording = 0;
PIRrecording = 0;
}
//// Sleep si necessaire si personne n'est connecté entre 2 fichiers
if (sleep_mode == true && WiFi.softAPgetStationNum() < 1) {
Serial.print(F("Sleep "));
Serial.println(sleep_duree);
esp_sleep_enable_timer_wakeup(1000000 * 60 * (uint64_t)sleep_duree);
esp_deep_sleep_start();
delay(1000);
}
} else { // regular
another_save_avi();
}
}
}
}
}
static esp_err_t config_camera() {
camera_config_t config;
//Serial.println("config camera");
if (new_config == 5) {
config.ledc_channel = LEDC_CHANNEL_0;
config.ledc_timer = LEDC_TIMER_0;
config.pin_d0 = Y2_GPIO_NUM;
config.pin_d1 = Y3_GPIO_NUM;
config.pin_d2 = Y4_GPIO_NUM;
config.pin_d3 = Y5_GPIO_NUM;
config.pin_d4 = Y6_GPIO_NUM;
config.pin_d5 = Y7_GPIO_NUM;
config.pin_d6 = Y8_GPIO_NUM;
config.pin_d7 = Y9_GPIO_NUM;
config.pin_xclk = XCLK_GPIO_NUM;
config.pin_pclk = PCLK_GPIO_NUM;
config.pin_vsync = VSYNC_GPIO_NUM;
config.pin_href = HREF_GPIO_NUM;
config.pin_sscb_sda = SIOD_GPIO_NUM;
config.pin_sscb_scl = SIOC_GPIO_NUM;
config.pin_pwdn = PWDN_GPIO_NUM;
config.pin_reset = RESET_GPIO_NUM;
config.xclk_freq_hz = 20000000;
config.pixel_format = PIXFORMAT_JPEG;
config.frame_size = FRAMESIZE_UXGA;
fb_max = 7; // for vga and uxga
config.jpeg_quality = 8;
config.fb_count = fb_max + 1;
// camera init
cam_err = esp_camera_init(&config);
if (cam_err != ESP_OK) {
Serial.printf("Camera init error 0x%x", cam_err);
major_fail();
}
new_config = 2;
}
delay(100);
sensor_t * ss = esp_camera_sensor_get();
ss->set_quality(ss, quality);
ss->set_framesize(ss, (framesize_t)framesize);
if (gray == 1) {
ss->set_special_effect(ss, 2); // 0 regular, 2 grayscale
} else {
ss->set_special_effect(ss, 0); // 0 regular, 2 grayscale
}
for (int j = 0; j < 3; j++) {
do_fb(); // start the camera ... warm it up
delay(1);
}
}
void nofichiersave(fs::FS & fs, const char * nomfic) {
File ficnofic = fs.open(nomfic, FILE_WRITE);
if (!ficnofic) {
Serial.println(F("err open /nofic.jsn writing"));
}
DynamicJsonDocument json(32);
json["nofichier"] = numero_fichier;
serializeJson(json, ficnofic);
}
int nofichierread(fs::FS & fs, const char * nomfic) {
File ficnofic = fs.open(nomfic, FILE_READ);
if (!ficnofic) {
Serial.println(F("err open /nofic.jsn reading"));
}
DynamicJsonDocument json(32);
DeserializationError error = deserializeJson(json, ficnofic);
if (error) {
Serial.println(F("err json /nofic.jsn"));
ficnofic.println();
return (numero_fichier);
}
numero_fichier = json["nofichier"];
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// start_avi - open the files and write in headers
//
static esp_err_t start_avi() {
Serial.println(F("Starting an avi "));
config_camera();
if ( (int)timeinfo.tm_year > 110 ) {
time(&now);
localtime_r(&now, &timeinfo);
strftime(strftime_buf, sizeof(strftime_buf), "%F_%H.%M.%S", &timeinfo);
} else {
nofichierread(SD_MMC, "/nofic.jsn");
sprintf(strftime_buf, "%d", numero_fichier);
}
char fname[100];
if (framesize == 6) {
sprintf(fname, "/sdcard/%s_%s_vga_Q%d_I%d_L%d_S%d.avi", devname, strftime_buf, quality, capture_interval, xlength, xspeed);
} else if (framesize == 7) {
sprintf(fname, "/sdcard/%s_%s_svga_Q%d_I%d_L%d_S%d.avi", devname, strftime_buf, quality, capture_interval, xlength, xspeed);
} else if (framesize == 10) {
sprintf(fname, "/sdcard/%s_%s_uxga_Q%d_I%d_L%d_S%d.avi", devname, strftime_buf, quality, capture_interval, xlength, xspeed);
} else if (framesize == 5) {
sprintf(fname, "/sdcard/%s_%s_cif_Q%d_I%d_L%d_S%d.avi", devname, strftime_buf, quality, capture_interval, xlength, xspeed);
} else {
Serial.println("Wrong framesize");
sprintf(fname, "/sdcard/%s_%s_xxx_Q%d_I%d_L%d_S%d.avi", devname, strftime_buf, quality, capture_interval, xlength, xspeed);
}
Serial.print(F("\nFile name will be >")); Serial.print(fname); Serial.println("<");
avifile = fopen(fname, "w");
idxfile = fopen("/sdcard/idx.tmp", "w");
if (avifile != NULL) {
//Serial.printf("File open: %s\n", fname);
} else {
Serial.println("err open file");
major_fail();
}
if (idxfile != NULL) {
//Serial.printf("File open: %s\n", "/sdcard/idx.tmp");
} else {
Serial.println(F("err open file"));
major_fail();
}
for ( i = 0; i < AVIOFFSET; i++)
{
char ch = pgm_read_byte(&avi_header[i]);
buf[i] = ch;
}
size_t err = fwrite(buf, 1, AVIOFFSET, avifile);
if (framesize == 6) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(vga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(vga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(vga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(vga_h, 1, 2, avifile);
} else if (framesize == 10) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(uxga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(uxga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(uxga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(uxga_h, 1, 2, avifile);
} else if (framesize == 7) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(svga_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(svga_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(svga_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(svga_h, 1, 2, avifile);
} else if (framesize == 5) {
fseek(avifile, 0x40, SEEK_SET);
err = fwrite(cif_w, 1, 2, avifile);
fseek(avifile, 0xA8, SEEK_SET);
err = fwrite(cif_w, 1, 2, avifile);
fseek(avifile, 0x44, SEEK_SET);
err = fwrite(cif_h, 1, 2, avifile);
fseek(avifile, 0xAC, SEEK_SET);
err = fwrite(cif_h, 1, 2, avifile);
}
fseek(avifile, AVIOFFSET, SEEK_SET);
Serial.print(F("\nRecording "));
Serial.print(total_frames);
Serial.println(F(" video frames ...\n"));
startms = millis();
bigdelta = millis();
totalp = 0;
totalw = 0;
overtime_count = 0;
jpeg_size = 0;
movi_size = 0;
uVideoLen = 0;
idx_offset = 4;
frame_cnt = 0;
frames_so_far = 0;
skipping = 0;
skipped = 0;
newfile = 1;
other_cpu_active = 1;
} // end of start avi
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// another_save_avi runs on cpu 1, saves another frame to the avi file
//
// the "baton" semaphore makes sure that only one cpu is using the camera subsystem at a time
//
static esp_err_t another_save_avi() {
xSemaphoreTake( baton, portMAX_DELAY );
if (fb_in == fb_out) { // nothing to do
xSemaphoreGive( baton );
} else {
fb_out = (fb_out + 1) % fb_max;
int fblen;
fblen = fb_q[fb_out]->len;
//xSemaphoreGive( baton );
if (BlinkWithWrite) {
digitalWrite(33, LOW);
}
jpeg_size = fblen;
movi_size += jpeg_size;
uVideoLen += jpeg_size;
bw = millis();
size_t dc_err = fwrite(dc_buf, 1, 4, avifile);
size_t ze_err = fwrite(zero_buf, 1, 4, avifile);
bw = millis();
size_t err = fwrite(fb_q[fb_out]->buf, 1, fb_q[fb_out]->len, avifile);
if (err == 0 ) {
Serial.println(F("Err avi write"));
major_fail();
}
totalw = totalw + millis() - bw;
//xSemaphoreTake( baton, portMAX_DELAY );
esp_camera_fb_return(fb_q[fb_out]); // release that buffer back to the camera system
xSemaphoreGive( baton );
remnant = (4 - (jpeg_size & 0x00000003)) & 0x00000003;
print_quartet(idx_offset, idxfile);
print_quartet(jpeg_size, idxfile);
idx_offset = idx_offset + jpeg_size + remnant + 8;
jpeg_size = jpeg_size + remnant;
movi_size = movi_size + remnant;
if (remnant > 0) {
size_t rem_err = fwrite(zero_buf, 1, remnant, avifile);
}
fileposition = ftell (avifile); // Here, we are at end of chunk (after padding)
fseek(avifile, fileposition - jpeg_size - 4, SEEK_SET); // Here we are the the 4-bytes blank placeholder
print_quartet(jpeg_size, avifile); // Overwrite placeholder with actual frame size (without padding)
fileposition = ftell (avifile);
fseek(avifile, fileposition + 6, SEEK_SET); // Here is the FOURCC "JFIF" (JPEG header)
// Overwrite "JFIF" (still images) with more appropriate "AVI1"
size_t av_err = fwrite(avi1_buf, 1, 4, avifile);
fileposition = ftell (avifile);
fseek(avifile, fileposition + jpeg_size - 10 , SEEK_SET);
//Serial.println("Write done");
//41 totalw = totalw + millis() - bw;
//if (((fb_in + fb_max - fb_out) % fb_max) > 0 ) {
// Serial.print(((fb_in + fb_max - fb_out) % fb_max)); Serial.print(F(" ");
//}
digitalWrite(33, HIGH);
}
} // end of another_pic_avi
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// end_avi runs on cpu 1, empties the queue of frames, writes the index, and closes the files
//
static esp_err_t end_avi() {
unsigned long current_end = 0;
other_cpu_active = 0 ; // shuts down the picture taking program
//Serial.print(" Write Q: "); Serial.print((fb_in + fb_max - fb_out) % fb_max); Serial.print(" in/out "); Serial.print(fb_in); Serial.print(" / "); Serial.println(fb_out);
for (int i = 0; i < fb_max; i++) { // clear the queue
another_save_avi();
}
//Serial.print(" Write Q: "); Serial.print((fb_in + fb_max - fb_out) % fb_max); Serial.print(" in/out "); Serial.print(fb_in); Serial.print(" / "); Serial.println(fb_out);
current_end = ftell (avifile);
Serial.println(F("End of avi - close files"));
elapsedms = millis() - startms;
float fRealFPS = (1000.0f * (float)frame_cnt) / ((float)elapsedms) * xspeed;
float fmicroseconds_per_frame = 1000000.0f / fRealFPS;
uint8_t iAttainedFPS = round(fRealFPS);
uint32_t us_per_frame = round(fmicroseconds_per_frame);
//Modify the MJPEG header from the beginning of the file, overwriting various placeholders
fseek(avifile, 4 , SEEK_SET);
print_quartet(movi_size + 240 + 16 * frame_cnt + 8 * frame_cnt, avifile);
fseek(avifile, 0x20 , SEEK_SET);
print_quartet(us_per_frame, avifile);
unsigned long max_bytes_per_sec = movi_size * iAttainedFPS / frame_cnt;
fseek(avifile, 0x24 , SEEK_SET);
print_quartet(max_bytes_per_sec, avifile);
fseek(avifile, 0x30 , SEEK_SET);
print_quartet(frame_cnt, avifile);
fseek(avifile, 0x8c , SEEK_SET);
print_quartet(frame_cnt, avifile);
fseek(avifile, 0x84 , SEEK_SET);
print_quartet((int)iAttainedFPS, avifile);
fseek(avifile, 0xe8 , SEEK_SET);
print_quartet(movi_size + frame_cnt * 8 + 4, avifile);
Serial.println(F("\n*** Video ok,saved ***\n"));
Serial.print(F("Recorded "));
Serial.print(elapsedms / 1000);
Serial.print(F("s in "));
Serial.print(frame_cnt);
Serial.print(F(" frames\nFile size is "));
Serial.print(movi_size + 12 * frame_cnt + 4);
Serial.print(F(" bytes\nActual FPS is "));
Serial.print(fRealFPS, 2);
Serial.print(F("\nMax data rate is "));
Serial.print(max_bytes_per_sec);
Serial.print(F(" byte/s\nFrame duration is ")); Serial.print(us_per_frame); Serial.println(F(" us"));
Serial.print(F("Average frame length is ")); Serial.print(uVideoLen / frame_cnt); Serial.println(F(" bytes"));
Serial.print(F("Average picture time (ms) ")); Serial.println( totalp / frame_cnt );
Serial.print(F("Average write time (ms) ")); Serial.println( totalw / frame_cnt );
Serial.print(F("Frames Skipped % ")); Serial.println( 100.0 * skipped / total_frames, 1 );
Serial.println(F("Writing the index"));
fseek(avifile, current_end, SEEK_SET);
fclose(idxfile);
size_t i1_err = fwrite(idx1_buf, 1, 4, avifile);
print_quartet(frame_cnt * 16, avifile);
idxfile = fopen("/sdcard/idx.tmp", "r");
if (idxfile != NULL) {
//Serial.printf("File open: %s\n", "/sdcard/idx.tmp");
} else {
Serial.println(F("err open file"));
//major_fail();
}
char * AteBytes;
AteBytes = (char*) malloc (8);
for (int i = 0; i < frame_cnt; i++) {
size_t res = fread ( AteBytes, 1, 8, idxfile);
size_t i1_err = fwrite(dc_buf, 1, 4, avifile);
size_t i2_err = fwrite(zero_buf, 1, 4, avifile);
size_t i3_err = fwrite(AteBytes, 1, 8, avifile);
}
free(AteBytes);
fclose(idxfile);
fclose(avifile);
int xx = remove("/sdcard/idx.tmp");
Serial.println(F("---"));
// incremente le numero_fichier
if ( (int)timeinfo.tm_year < 110) {
numero_fichier++;
nofichiersave(SD_MMC, "/nofic.jsn");
sprintf(strftime_buf, "%d", numero_fichier);
}
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// do_fb - just takes a picture and discards it
//
static esp_err_t do_fb() {
xSemaphoreTake( baton, portMAX_DELAY );
camera_fb_t * fb = esp_camera_fb_get();
Serial.print(F("Pic, len=")); Serial.println(fb->len);
esp_camera_fb_return(fb);
xSemaphoreGive( baton );
}
//
// if we have no camera, or sd card, then flash rear led on and off to warn the human SOS - SOS
//
void major_fail() {
for (int i = 0; i < 10; i++) { // 10 loops or about 100 seconds then reboot
digitalWrite(33, LOW); delay(150);
digitalWrite(33, HIGH); delay(150);
digitalWrite(33, LOW); delay(150);
digitalWrite(33, HIGH); delay(150);
digitalWrite(33, LOW); delay(150);
digitalWrite(33, HIGH); delay(150);
delay(1000);
digitalWrite(33, LOW); delay(500);
digitalWrite(33, HIGH); delay(500);
digitalWrite(33, LOW); delay(500);
digitalWrite(33, HIGH); delay(500);
digitalWrite(33, LOW); delay(500);
digitalWrite(33, HIGH); delay(500);
delay(1000);
Serial.print(F("Major Fail ")); Serial.print(i); Serial.print(F(" / ")); Serial.println(10);
}
ESP.restart();
}
void do_time() {
if (WiFi.status() != WL_CONNECTED) {
Serial.println(F("** WiFi reconnect **"));
WiFi.reconnect();
delay(5000);
if (WiFi.status() != WL_CONNECTED) {
Serial.println(F("** WiFi rerestart **"));
init_wifi();
}
}
Test_horaires();
}
////////////////////////////////////////////////////////////////////////////////////
//
// some globals for the loop()
//
long wakeup;
long last_wakeup = 0;
void loop()
{
wakeup = millis();
if (wakeup - last_wakeup > (14 * 60 * 1000) ) { // 14 minutes
last_wakeup = millis();
do_time();
}
//ftpSrv.handleFTP();
server.handleClient();
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
// save photo stuff not currently used
static esp_err_t save_photo()
{
Serial.print(F("Taking picture: /capture.jpg"));
camera_fb_t *fb = esp_camera_fb_get();
char *filename = (char*)malloc(21 + sizeof(int));
sprintf(filename, "/sdcard/capture.jpg");
Serial.println(filename);
FILE *file = fopen(filename, "w");
if (file != NULL) {
size_t err = fwrite(fb->buf, 1, fb->len, file);
Serial.printf("File saved: %s\n", filename);
} else {
Serial.println(F("err open file"));
}
fclose(file);
esp_camera_fb_return(fb);
free(filename);
}
void capture_handler() {
save_photo();
time(&now);
const char *strdate = ctime(&now);
const char msg[] PROGMEM = R"rawliteral(<!doctype html>
<head>
<title>ESP32 Photo</title>
<style>
body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }\
</style>
</head>
<body>
<h1>Capture</h1>
<p>Date: %s</p>
<img src="/capture.jpg" />
<br>
<h3><a href="http://%s/">http://%s/</a></h3>
</body>
</html>)rawliteral";
sprintf(the_page, msg, strdate, localip, localip);
server.send(200, "text/html", the_page);
delay(1000); // pour eviter les prise en rafale
}
static esp_err_t save_photo_numbered()
{
file_number++;
Serial.print(F("Taking picture: "));
Serial.print(file_number);
camera_fb_t *fb = esp_camera_fb_get();
char *filename = (char*)malloc(21 + sizeof(int));
sprintf(filename, "/sdcard/capture_%d.jpg", file_number);
Serial.println(filename);
FILE *file = fopen(filename, "w");
if (file != NULL) {
size_t err = fwrite(fb->buf, 1, fb->len, file);
Serial.printf("File saved: %s\n", filename);
} else {
Serial.println(F("err open file"));
}
fclose(file);
esp_camera_fb_return(fb);
free(filename);
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
//
void do_start(char *the_message) {
Serial.print(F("do_start ")); Serial.println(the_message);
const char msg[] PROGMEM = R"rawliteral(<!doctype html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1">
<title>%s ESP32-CAM start</title>
</head>
<body>
<h1>%s<br>ESP32-CAM Video Recorder %s </h1><br>
<h3>Message is <font color="red">%s</font></h3><br>
Recording = %d (1 is active)<br>
Capture Interval = %d ms<br>
Length = %d seconds<br>
Quality = %d (10 best to 50 worst)<br>
Framesize = %d (10 UXGA, 7 SVGA, 6 VGA, 5 CIF)<br>
Repeat = %d<br>
Speed = %d<br>
Gray = %d<br><br>
<br>
<br><div id="image-container"></div>
<h3><a href="http://%s/">http://%s/ retour au status</a></h3>
</body>
</html>)rawliteral";
sprintf(the_page, msg, devname, devname, vernum, the_message, recording, capture_interval, capture_interval * total_frames / 1000, quality, framesize, repeat, xspeed, gray, localip, localip);
//Serial.println(strlen(msg));
}
bool start_handler() {
char buf[80];
size_t buf_len;
char new_res[20];
if (recording == 1) {
server.send(200, "text/html", "You must Stop recording, before starting a new one. Start over ...");
return false;
} else {
//recording = 1;
Serial.println(F("start recording"));
sensor_t * s = esp_camera_sensor_get();
int new_interval = capture_interval;
int new_length = capture_interval * total_frames;
int new_framesize = s->status.framesize;
int new_quality = s->status.quality;
int new_repeat = 0;
int new_xspeed = 1;
int new_xlength = 3;
int new_gray = 0;
/*
Serial.println("");
Serial.println("Current Parameters :");
Serial.print(" Capture Interval = "); Serial.print(capture_interval); Serial.println(" ms");
Serial.print(" Length = "); Serial.print(capture_interval * total_frames / 1000); Serial.println(" s");
Serial.print(" Quality = "); Serial.println(new_quality);
Serial.print(" Framesize = "); Serial.println(new_framesize);
Serial.print(" Repeat = "); Serial.println(repeat);
Serial.print(" Speed = "); Serial.println(xspeed);
*/
for (int i = 0; i < server.args(); i++) {
Serial.print(server.argName(i));
Serial.print(F(" "));
Serial.println(server.arg(i));
int len = server.arg(i).length() + 1;
char retour[20] = {0};
server.arg(i).toCharArray(retour, len);
if (server.argName(i) == "length") {
int x = atoi(retour);
if (x >= 1 && x <= 3600 * 24 ) { // 1 sec to 24 hours
new_length = x;
}
}
else if (server.argName(i) == "repeat") {
int x = atoi(retour);
if (x >= 0 ) {
new_repeat = x;
}
}
else if (server.argName(i) == "framesize") {
if (strcmp(retour, "UXGA") == 0) {
new_framesize = 10;
} else if (strcmp(retour, "SVGA") == 0) {
new_framesize = 7;
} else if (strcmp(retour, "VGA") == 0) {
new_framesize = 6;
} else if (strcmp(retour, "CIF") == 0) {
new_framesize = 5;
} else {
Serial.println(F("Only UXGA, SVGA, VGA, and CIF are valid!"));
}
}
else if (server.argName(i) == "quality") {
int x = atoi(retour);
if (x >= 10 && x <= 50) { // MINIMUM QUALITY 10 to save memory
new_quality = x;
}
}
else if (server.argName(i) == "speed") {
int x = atoi(retour);
if (x >= 1 && x <= 100) {
new_xspeed = x;
}
}
else if (server.argName(i) == "interval") {
int x = atoi(retour);
if (x <= 1 ) {
new_interval = capture_interval;
} else {
new_interval = x;
}
}
else if (server.argName(i) == "sleep") { // en minute
sleep_mode = true;
if (len > 1) sleep_duree = atoi(retour);
}
else if (server.argName(i) == "gray") {
int x = atoi(retour);
if (x == 1 ) {
new_gray = x;
} else {
new_gray = 0;
}
}
else if (server.argName(i) == "ssid") {
strncpy(ssid, retour, len);
}
else if (server.argName(i) == "pass") {
strncpy(pass, retour, len);
}
else if (server.argName(i) == "horaire") {
strncpy(horaire, retour, len);
}
}
framesize = new_framesize;
capture_interval = new_interval;
xlength = new_length;
total_frames = new_length * 1000 / capture_interval;
repeat = new_repeat;
quality = new_quality;
xspeed = new_xspeed;
gray = new_gray;
do_start("Starting a new AVI");
server.send(200, "text/html", the_page);
recording = 1;
return true;
}
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
void do_stop(char *the_message) {
Serial.print(F("do_stop ")); Serial.println(the_message);
const char msg[] PROGMEM = R"rawliteral(<!doctype html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1">
<title>%s ESP32-CAM stop</title>
</head>
<body>
<h1>%s<br>ESP32-CAM configurations %s </h1><br>
<h3>Message is <font color="red">%s</font></h3><br>
<h3><a href="http://%s/">http://%s/ retour au status</a></h3>
<h3><a href="http://%s/start?framesize=VGA&length=1800&interval=100&quality=10&repeat=100&speed=1&gray=0">VGA 2 fps for 30 minutes repeat, 1x playback</a></h3>
<h3><a href="http://%s/start?framesize=VGA&length=1800&interval=500&quality=10&repeat=300&speed=30&gray=0">VGA 2 fps, for 30 minutes repeat, 30x playback</a></h3>
<h3><a href="http://%s/start?framesize=UXGA&length=1800&interval=1000&quality=10&repeat=100&speed=30&gray=0">UXGA 1 sec per frame, for 30 minutes repeat, 30x playback</a></h3>
<h3><a href="http://%s/start?framesize=UXGA&length=1800&interval=500&quality=10&repeat=100&speed=30&gray=0">UXGA 2 fps for 30 minutes repeat, 15x playback</a></h3>
<h3><a href="http://%s/start?framesize=CIF&length=1800&interval=50&quality=10&repeat=100&speed=1&gray=0">CIF 20 fps second for 30 minutes repeat</a></h3>
<h3><a href="http://%s/start?framesize=UXGA&length=1800&interval=10000&quality=10&repeat=100&speed=1&gray=0">UXGA 10 second for 30 minutes repeat</a></h3>
<h3><a href="http://%s/start?framesize=UXGA&length=1800&interval=600000&quality=10&repeat=100&speed=1&gray=0&sleep">UXGA 10 min for 30 minutes repeati sleep</a></h3>
<br>
Capture Interval en ms<br>
Length en seconds<br>
Quality = 10 meilleurs a 50 pire<br>
Framesize = UXGA SVGA VGA CIF<br>
Repeat = nombre de fois<br>
Speed = vitesse<br>
Gray = 1 ou 0<br>
<br>mis a jour dela config initiale par
<h3><a href="http://%s/saveconfig"> saveconfig</a></h3>
Fichier sur la microSD /config.jsn <br>
%s
</body>
</html>)rawliteral";
//ex: {"devname":"esp32-cam","framesize":6,"repeat":100,"xspeed":1,"gray":0,"quality":10,"capture_interval":10000,"length":180,"ssid":"SNHACK","pass":"1234567890","horaire":"10 11,12,13,14,15,16,17,18,19,20"}
sprintf(the_page, msg, devname, devname, vernum, the_message, localip, localip, localip, localip, localip, localip, localip, localip, localip, localip, buf_config);
Serial.println(the_page);
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
bool stop_handler() {
recording = 0;
Serial.println(F("stop recording"));
do_stop("Stopping previous recording");
server.send(200, "text/html", the_page);
delay(1000);
return true;
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
//
void do_status(char *the_message) {
Serial.print(F("do_status ")); Serial.println(the_message);
const char msg[] PROGMEM = R"rawliteral(<!doctype html>
<html>
<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width,initial-scale=1">
<title>%s ESP32-CAM index</title>
</head>
<body>
<h1>%s<br>ESP32-CAM Video Recorder %s <br><font color="red">%s</font></h1><br>
<h3>Page de <font color="red">%s</font></h3><br>
Total SD Space is %d MB, Used SD Space is %d MB<br>
Recording = %d (1 is active)<br>
Frame %d of %d, Skipped %d<br><br>
Capture Interval = %d ms<br>
Length = %d seconds<br>
Quality = %d (10 best to 50 worst)<br>
Framesize = %d (10 UXGA, 7 SVGA, 6 VGA, 5 CIF)<br>
Repeat = %d<br>
Playback Speed = %d<br>
Gray = %d<br><br>
Commandes possibles sur cette adresse ip:<br>
<h3><a href="http://%s/">http://%s/</a></h3>
<h3><a href="http://%s/stop">http://%s/stop<font color="red"> ... configuration et restart
<br>Vous devez faire stop pour modifier la configuration</font></a></h3>
<h3><a href="http://%s/list">http://%s/list> list </a></h3>
<h3><a href="http://%s/capture">http://%s/capture> photo </a></h3>
<h3><a href="http://%s/saveconfig"> saveconfig</a></h3>
Fichier sur la microSD /config.json ex: {"framesize":6,"repeat":100,"xspeed":1,"gray":0,"quality":10,"capture_interval":10000,"length":180},
cf list<br>
LED flash sur une frame, SOS flash si pas de microSD<br>
<br>
</body>
</html>)rawliteral";
time(&now);
const char *strdate = ctime(&now);
//Serial.printf("Total space: %lluMB\n", SD_MMC.totalBytes() / (1024 * 1024));
//Serial.printf("Used space: %lluMB\n", SD_MMC.usedBytes() / (1024 * 1024));
int tot = SD_MMC.totalBytes() / (1024 * 1024);
int use = SD_MMC.usedBytes() / (1024 * 1024);
//Serial.print(strlen(msg)); Serial.print(" ");
sprintf(the_page, msg, devname, devname, vernum, strdate, the_message, tot, use, recording, frames_so_far, total_frames, skipped, capture_interval, capture_interval * total_frames / 1000, quality, framesize, repeat, xspeed, gray, localip, localip, localip, localip, localip, localip, localip, localip, localip);
//Serial.println(strlen(the_page));
}
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
//
// LIST ///
void listDir(fs::FS & fs, const char * dirname, uint8_t levels) {
Serial.printf("Listing directory: %s\n", dirname);
String output = "";
output += "<html><head><meta charset=\"utf-8\">";
output += "<title> ESP32-CAM list</title>";
output += "</head><body>";
output += "<h3> Fichiers Tailles</h3>";
File root = fs.open(dirname);
if (!root) {
Serial.println(F("err open dir"));
return;
}
if (!root.isDirectory()) {
Serial.println(F("Not a dir"));
return;
}
File file = root.openNextFile();
while (file) {
delay(100);
if (file.isDirectory()) {
output += "<br><h2><a href=\"http://";
output += (String)localip;
output += (String)file.name();
output += "\">http://";
output += (String)localip;
output += (String)file.name();
output += "</a></h2>";
output += "\n";
//Serial.println((String)file.name());
if (levels) {
listDir(fs, file.name(), levels - 1);
}
} else {
output += "<br><a href=\"http://";
output += (String)localip;
output += (String)file.name();
output += "\">http://";
output += (String)localip;
output += (String)file.name();
output += "</a>";
output += " : ";
output += file.size();
//Serial.println((String)file.name());
}
file = root.openNextFile();
}
output += "<br>";
output += "<br><a href=\"http://";
output += (String)localip;
output += "\">http://";
output += (String)localip;
output += " Retour aux status</a>";
output += "</body></html>";
server.send(200, "text/html", output);
//Serial.println(F("fin"));
return;
}
bool listDir_handler() {
listDir(SD_MMC, "/", 0);
//Serial.println(F("listDir fin"));
return true;
}
///
/// SDCARD
///
bool loadFromSdCard(fs::FS & fs, String path) {
String dataType = "text/plain";
if (path.endsWith("/")) {
do_status("Refresh Status");
server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
server.sendHeader("Pragma", "no-cache");
server.sendHeader("Expires", "-1");
server.send(200, "text/html", the_page);
return true;
}
if (path.endsWith(".src")) {
path = path.substring(0, path.lastIndexOf("."));
} else if (path.endsWith(".htm")) {
dataType = "text/html";
} else if (path.endsWith(".css")) {
dataType = "text/css";
} else if (path.endsWith(".js")) {
dataType = "application/javascript";
} else if (path.endsWith(".png")) {
dataType = "image/png";
} else if (path.endsWith(".gif")) {
dataType = "image/gif";
} else if (path.endsWith(".jpg")) {
dataType = "image/jpeg";
} else if (path.endsWith(".ico")) {
dataType = "image/x-icon";
} else if (path.endsWith(".xml")) {
dataType = "text/xml";
} else if (path.endsWith(".pdf")) {
dataType = "application/pdf";
} else if (path.endsWith(".zip")) {
dataType = "application/zip";
}
File dataFile = fs.open(path.c_str());
if (dataFile.isDirectory()) {
path += "/index.htm";
dataType = "text/html";
dataFile = fs.open(path.c_str());
}
if (!dataFile) {
return false;
}
if (server.hasArg("download")) {
dataType = "application/octet-stream";
}
if (server.streamFile(dataFile, dataType) != dataFile.size()) {
Serial.println(F("Sent less data than expected!"));
}
dataFile.close();
return true;
}
///
/// DEFAULT LECTURE SD
///
void handleNotFound() {
if (loadFromSdCard(SD_MMC, server.uri())) {
return;
}
String message = "";
message += "URI: ";
message += server.uri();
message += "\nMethod: ";
message += (server.method() == HTTP_GET) ? "GET" : "POST";
message += "\nArguments: ";
message += server.args();
message += "\n";
for (uint8_t i = 0; i < server.args(); i++) {
message += " NAME:" + server.argName(i) + "\n VALUE:" + server.arg(i) + "\n";
}
server.send(404, "text/plain", message);
Serial.println(message);
}
///
/// SPIFFS SAVE config
///
bool saveSPIFFSConfigFile(void)
{
Serial.println(F("Save config"));
recording = 0;
DynamicJsonDocument json(512);
json["devname"] = devname;
json["quality"] = quality;
json["framesize"] = framesize;
json["capture_interval"] = capture_interval;
json["repeat"] = repeat;
json["xspeed"] = xspeed;
json["length"] = xlength;
json["gray"] = gray;
json["ssid"] = ssid;
json["pass"] = pass;
json["horaire"] = horaire;
File configFile = SPIFFS.open("/config.jsn", "w");
if (!configFile)
{
Serial.println(F("Failed to open config file for writing"));
}
//serializeJson(json, Serial);
serializeJsonPretty(json, Serial);
String output = "";
output += "<html><head><meta charset=\"utf-8\">";
output += "<title> ESP32-CAM sauvegarde</title>";
output += "</head><body>";
output += "<h3>Sauvegarde du fichier json sur la microSD</h3><br>";
serializeJson(json, output);
output += " <br> OK <br>";
output += " Attendre 10s avant de retourner sur la page d'avant!<br>" ;
output += " RESET en cours !</body></html>";
server.send(200, "text/html", output);
// sauv flash
serializeJson(json, configFile);
configFile.close();
saveFileconfigSD();
//end save
delay(1000);
ESP.restart();
}
///
/// RESET
///
void reset_handler() {
String output = "";
output += "<html><head><meta charset=\"utf-8\">";
output += "<title> ESP32-CAM reset</title>";
output += "</head><body>";
output += "<h3>Reset</h3><br>";
output += " Attendre 10s avant de retourner sur la page d'avant!<br>" ;
output += " RESET en cours !</body></html>";
server.send(200, "text/html", output);
delay(1000);
ESP.restart();
}
////
//// START CAMERA
////
void startCameraServer() {
//server.on("/", index_handler);
server.on("/capture", capture_handler);
server.on("/start", start_handler);
server.on("/stop", stop_handler);
server.on("/saveconfig", saveSPIFFSConfigFile);
server.on("/list", listDir_handler);
server.on("/reset", reset_handler);
server.onNotFound(handleNotFound);
server.begin();
Serial.println(F("Camera http started"));
}
projets/esp32-cam_timelaps_code.txt · Dernière modification : 2024/02/09 16:56 de 127.0.0.1
Outils de la page
Sauf mention contraire, le contenu de ce wiki est placé sous les termes de la licence suivante : CC Attribution-Share Alike 4.0 International
